Hi,
My Kanguro has really not been yet on the road for more than test rides and I couldn't help noticing the terrible noice the chain keeps.
Well, the reason is that the lower chain roller didn't have any surface material left (nylon probably) but the bearing was there; metal against metal.
This roller seems easy to replace with cheap commercial alternatives. What is the diameter of the original (must be at least 45mm)?
Also the swing arm upper chain 'slider' - or what ever you may call it - there was nothing left other that the small bolt and a couple of small bits of nylon.
Finally the questions:
The upper 'slider' - what does it look like (height etc) and if I want to make a replacement myself? Or where can I buy one?
Have spent long time trying to google etc...
Any pictures anyone might share with me?
Thanks
Kanguro X2 chain roller and slider
-
- Posts: 658
- Joined: 20 Sep 2009, 09:05
- Location: NL
Re: Kanguro X2 chain roller and slider
I'll have a look at my X2 this weekend
"Innamorato di vecchi motocicli Italiani"
-
- Site Admin
- Posts: 1267
- Joined: 25 Feb 2009, 16:06
- Location: Den Haag (NL)
- Contact:
Re: Kanguro X2 chain roller and slider
Hi Pauli,
Gini Mauro from the Italian Moto Morini Club makes/sells the lower roller. I have bought one from him, see this page.
Here you see them on the table when I bought one back in 2010.
If you create an account on the morinispecial.it page and log-in, you'll see an extra link in the top-menu: "Angolo Tecnico". If you open that link, you'll find the parts catalogue of the Kanguro X2 under "Cataloghi Parti di Ricambi" to download.
I believe partnumber of the slider is 19.02.40, but I don't know where to get one. Try Tremezzo.de, or if they don't have one, try of these German suppliers (see the link page):
Heim
Dieter Hoffmann
or Moto Stefano
Gini Mauro from the Italian Moto Morini Club makes/sells the lower roller. I have bought one from him, see this page.
Here you see them on the table when I bought one back in 2010.
If you create an account on the morinispecial.it page and log-in, you'll see an extra link in the top-menu: "Angolo Tecnico". If you open that link, you'll find the parts catalogue of the Kanguro X2 under "Cataloghi Parti di Ricambi" to download.
I believe partnumber of the slider is 19.02.40, but I don't know where to get one. Try Tremezzo.de, or if they don't have one, try of these German suppliers (see the link page):
Heim
Dieter Hoffmann
or Moto Stefano
-
- Posts: 8
- Joined: 15 May 2019, 08:39
Re: Kanguro X2 chain roller and slider
Hello Dieter,
Don't understand what's wrong with me - I did register myself but don't seem to find such links to the parts catalog!
Is there any possibility to give a direct link or even send an email attachment if I provide my mail address???
Thanks
Pauli
Don't understand what's wrong with me - I did register myself but don't seem to find such links to the parts catalog!
Is there any possibility to give a direct link or even send an email attachment if I provide my mail address???
Thanks
Pauli
-
- Site Admin
- Posts: 1267
- Joined: 25 Feb 2009, 16:06
- Location: Den Haag (NL)
- Contact:
Re: Kanguro X2 chain roller and slider
Hello Pauli,
sorry, I am not Dieter, but I understand the confusion, because I meant the German workshops:
- or Heim,
- or Dieter Hoffmann
- or Moto Stefano
(these three are listed on the link page).
Anyway, just downloaded the X2 parts catalogue. Will send it to your e-mail address. You don't have to mention it here. As I am the administrator of this Forum, I can see your e-mail address
sorry, I am not Dieter, but I understand the confusion, because I meant the German workshops:
- or Heim,
- or Dieter Hoffmann
- or Moto Stefano
(these three are listed on the link page).
Anyway, just downloaded the X2 parts catalogue. Will send it to your e-mail address. You don't have to mention it here. As I am the administrator of this Forum, I can see your e-mail address
-
- Posts: 8
- Joined: 15 May 2019, 08:39
Re: Kanguro X2 chain roller and slider
How silly of me!
Thank You SO much!
Pauli
-
- Site Admin
- Posts: 1267
- Joined: 25 Feb 2009, 16:06
- Location: Den Haag (NL)
- Contact:
Re: Kanguro X2 chain roller and slider
You're welcome! Very nice bike you have got!! Have fun with it!
-
- Posts: 834
- Joined: 10 Mar 2009, 10:13
Re: Kanguro X2 chain roller and slider
There is a guy in Italia who makes the sliders too, Mauro Gini probably knows him. I don't have contact details...