Engine parts

350 Sport & Touring, 500 Sport & Touring
Post Reply
Hazabua
Posts: 2
Joined: 20 Dec 2020, 19:29

Engine parts

Post by Hazabua » 20 Dec 2020, 19:49

Hello, I am new here and hope to get some advise to be able to complete my restoration.
I am restoring a Morini 500 sport MJ80, just took the engine apart and found some worn items which I would like to replace but could not find any parts source.
Pistons or at least Rings
Valve guides
Right hand main bearing,
Connecting rod bearings
Do nor want to use used parts if possible at all.

Gaskets, seal rings, roller bearings I found in the www.
Can anyone help with a good source or contact ?
Many thx for replies.
Br Ulrich

350-v-twin
Site Admin
Posts: 1267
Joined: 25 Feb 2009, 16:06
Location: Den Haag (NL)
Contact:

Re: Engine parts

Post by 350-v-twin » 21 Dec 2020, 10:06

Hello Ulrich,

there are 3 main suppliers:

Liebrandt Brothers, see www.tremezzo.de
Mdina Italia, see https://www.mdinaitalia.co.uk/
Hermy, former USA importer, see https://herdan.com/

Furthermore in Germany:
Heim, see https://www.heimracing.eu/
Dieter Hoffmann, see http://www.morinicorse.com/

Hazabua
Posts: 2
Joined: 20 Dec 2020, 19:29

Re: Engine parts

Post by Hazabua » 21 Dec 2020, 21:19

Thx money spent 😇 got all in england , hope brexit allows supplies.....

350-v-twin
Site Admin
Posts: 1267
Joined: 25 Feb 2009, 16:06
Location: Den Haag (NL)
Contact:

Re: Engine parts

Post by 350-v-twin » 21 Dec 2020, 23:34

Well there is a +50km long traffic queue at Dover. Best is to get parts through airmail/DHL.

123morini
Posts: 9
Joined: 20 Jul 2016, 19:34

Re: Engine parts

Post by 123morini » 08 Jan 2021, 15:34

Hello Ulrich ,

In the past I used conrod shells from Fiat cars but they have to be machined to fit .
I guess you can find all details there " roller bearing conversion site:http://www.morini-riders-club.com/forum ... Big end shells from the original FIAT 500/Multipla fit the 500 big ends ". And the 501 also .


Hope that will help you ,

Christian .

Post Reply