HELP Dansi electronic ignition

Technical questions about Moto Morini motorbikes/mopeds
Technische vragen over Moto Morini motoren/bromfietsen
Post Reply
lelle106
Posts: 1
Joined: 13 Jul 2013, 20:33
Location: Sweden

HELP Dansi electronic ignition

Post by lelle106 » 13 Jul 2013, 20:56

Hi
I am new to the forum and this is my first post.

I have a Monarch 125 TS -73 with Franco Morini 125cc two-strokes.

Got hold of a Dansi breakerless ignition system instead of the original Dansi Control Systems.

The system is changed and the engine runs great, my problem is that I do not get the charging current to the battery. The system has 6 wires which 3 (black, red and green) goes to the ignition coil.

Others (blue, brown and orange) I do not know how they should be connected.

The blue has plenty of AC, the other not measurable.

My question is how these three should be connected?

Old system had 4 cables, of which only 3 were used.

Can not remember the color of the original ignition system wires, but can find out. Know a yellow cable is not used, it can be two red and one green, but not sure now. Viewing for tomorrow.

NOTE translation with Google[img]
Monark 125 TS

User avatar
mantaray
Posts: 838
Joined: 28 Feb 2009, 13:51
Location: Merksem (B)

Post by mantaray » 14 Jul 2013, 15:02

Hi lelle, wrong forum i guess.
We have nothing with Franco morini's

Post Reply