Page 1 of 1

ignition test

Posted: 04 Aug 2014, 13:51
by Heinz
Welcome,

A view weeks ago I bought a Moto Morini Corsaro 150 which I now would like to restore. Unfortunately the ignition prepared me still problems. Could you give me a few tips on how I can check this best way? I would be interested to check the three wires from the alternator in particular?

Thank you for your valuable advice in advance.

Regards

Heinz Buchi

Re: ignition test

Posted: 07 Aug 2014, 21:34
by Tom
Hello Heinz,

It is difficult to give you an answer.
First: do you have an electronic diagram of the corsaro?
Second: what seems to be the problem, no spark, no current on the wires from the altenator, maybe something more specific to give us?
Third: have you seen this: http://www.powerdynamo.biz/eng/systems/ ... 76main.htm

Maybe a good investment if you are planning to restore your 150, and if you are going to use it regularly, i should not spend much time on the original and 50 years old 6 volts and points unless you have experience with the contact points system.
My Corsaro 150 has given me some problems, in particulair with battery charging.